main features
Automatic In-line processor for water washable photopolymer plates
- Intuitive user-friendly HMI touch screen controlling all the steps of the process
- Sections of the Visio in-line processor:
- Black mask removal section for digital plates
- Wash out section
- Rinsing with fresh water
- Pre-dryer
- Post exposure
- Wash out carried out by two brushes with orbital movement
- Final cleaning through a flat brush Air-knife removing excessive water
- Automatic platemaking process, with the possibility to process the plates in sequence
- Remote connection possibility
- Compressed air and water supply required
OPTIONAL
- Main exposure unit (designed to fit under the drying tunnel or table top)
technical data
| MODEL | 520 | 760 | 920 | |
| Max Plate Dimension | 520x762 mm 20''x30'' |
780x1100 mm 29''x43'' |
920x1200 mm 36''x47'' |
|
| Dimension WxDxH cm | 129x485x114 | 139x546x114 | 152x546x114 | con tunnel |
| Weight kg | 500 | 640 | 900 | con tunnel |
| Power Supply |
400V 3PH+N+GND 50/60Hz 230V 3PH+GND 50/60Hz |
|||
| Power kW | 11,5 | 13 | 17 | |
| Tank Capacity (l) | 40 | 50 | 58 | |
| Air Consumption (l/min) | 1000 | 1200 | 1500 | |
| Pressure (bar) | 6 | 6 | 6 | |
| Post-Exposure UVA Lamps | 4x40W 09 L. 900 mm |
4x40W 09 L. 1200 mm |
4x40W 09 L. 1200 mm |
|
The images in this document are provided for illustrative purposes.
We reserve the right to make changes and improvements to any product described herein without notice.
